<?xml version="1.0" encoding="UTF-8"?><rss version="0.92">
<channel>
	<title>QCFK</title>
	<link>http://www.qcfk.net</link>
	<description>welcome to qcfk.net</description>
	<lastBuildDate>Sun, 05 Sep 2010 02:09:13 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	<!-- generator="WordPress/3.0-beta1" -->

	<item>
		<title>Key West Boats – Charleston, South Carolina &#124; Swing Slovenia &#8230;</title>
		<description><![CDATA[09/5 2010. I have a 1991 Keywest 1900 series dual console and it is still in excellent shape,A few small cracks in the gel coat but nothing of concern.The engine is a 1991 Suzuki 140 two stroke and the boat will run about 45 mph. ]]></description>
		<link>http://www.qcfk.net/?p=1068</link>
			</item>
	<item>
		<title>Some pointers I thought might help for installing a 500 GPH bilge &#8230;</title>
		<description><![CDATA[We decided against using a 1 inch bit because as we were drilling in with the 1/2 inch bit, the gel coat on the outside would crack off (just a little) from the outside diameter of the bit. ]]></description>
		<link>http://www.qcfk.net/?p=1067</link>
			</item>
	<item>
		<title>GEL COAT &#8212; What am i doing wrong? now i know!</title>
		<description><![CDATA[ok, over the years i've tried making casts using an initial coat of gel coat but it always turns out bad. (silicone molds) again i tried this week.]]></description>
		<link>http://www.qcfk.net/?p=1066</link>
			</item>
	<item>
		<title>Interstate Container Cambridge International Expo 2010 will &#8230;</title>
		<description><![CDATA[Etavad and compostable repulpable FBA certified green COAT ? ? Boxing at the EPF? ]]></description>
		<link>http://www.qcfk.net/?p=1064</link>
			</item>
	<item>
		<title>What is the difference between acrylic nails, gel nails, and solar &#8230;</title>
		<description><![CDATA[gels and regular acrylic are often the same.. same structure and how they are applied… the only different part is when after they buff your nails.. they would NOT add oil to your nails but they would put a coat of gels ontop… gel dry ...]]></description>
		<link>http://www.qcfk.net/?p=1063</link>
			</item>
	<item>
		<title>Sapporo Brevet « Blog o&#039; Rollo</title>
		<description><![CDATA[My only solace is that I had to ride my heavy touring bike because my carbon frame had started flexing a bit, making me suspect those cracks where the chain stays meet the bottom bracket were not just in the gel coat . ...]]></description>
		<link>http://www.qcfk.net/?p=1062</link>
			</item>
	<item>
		<title>The basic characteristics of Wacker&#039;s fumed silica &#124; Battery Category</title>
		<description><![CDATA[Unsaturated polyester resin industry: a. ]]></description>
		<link>http://www.qcfk.net/?p=1061</link>
			</item>
	<item>
		<title>303 AEROSPACE PROTECTANT GAL. « Glennie Hahner</title>
		<description><![CDATA[Powerful UV screening protection for colored gel - coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics &#038; leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, ...]]></description>
		<link>http://www.qcfk.net/?p=1059</link>
			</item>
	<item>
		<title>Improve your outdoor living with Virginia decks &#124; Tallahassee Home &#8230;</title>
		<description><![CDATA[First of all a female mould is constructed which is then coated with the layer of the gel coat . Later on, in that layer, layers of the fiberglass are coated that consists of the resins to provide the required thickness to the deck]]></description>
		<link>http://www.qcfk.net/?p=1060</link>
			</item>
	<item>
		<title>1998-2002 Chevy Camaro Ultra Z Ram Air Fiberlgass Hood</title>
		<description><![CDATA[Built-in Ram Air Kit (no additional cost) Hand laid for quality show finish; Smooth gel coat on top and bottom sides; Direct Bolt-on using the original hardwares; Ultra Z Ram Air Hood - 98-02 Camaro - PFYC.com ...]]></description>
		<link>http://www.qcfk.net/?p=1057</link>
			</item>
</channel>
</rss>
